Author Topic: Clearing Rain Data- Zephyr PWS-1000  (Read 2503 times)

0 Members and 1 Guest are viewing this topic.

Offline AZDesertRat

  • Member
  • *
  • Posts: 9
Clearing Rain Data- Zephyr PWS-1000
« on: August 20, 2011, 09:13:39 PM »
I recently installed a new weather station and Cumulus software.
When I first set it up the rain gauge registered a couple inches while I was testing it all out and mounting it on the pole.
How do I clear than incorrect historical information and transfer the correct year to date number from my old La Salle station and Heavy Weather software this one replaced?

Offline hswaters

  • Senior Member
  • **
  • Posts: 52
  • hswaters
Re: Clearing Rain Data- Zephyr PWS-1000
« Reply #1 on: August 28, 2011, 12:14:23 PM »
I recently installed a new weather station and Cumulus software.
When I first set it up the rain gauge registered a couple inches while I was testing it all out and mounting it on the pole.
How do I clear than incorrect historical information and transfer the correct year to date number from my old La Salle station and Heavy Weather software this one replaced?



You may be able to find the answer here;
http://wiki.sandaysoft.com/a/FAQ

Offline Skywatch

  • Weather isn't just a hobby, it's a passion.
  • Forecaster
  • *****
  • Posts: 1804
  • Hakuna Matata (Timon and Pumba)
Re: Clearing Rain Data- Zephyr PWS-1000
« Reply #2 on: August 28, 2011, 12:21:19 PM »
What I did is under "EDIT" at the top of the program click it, you should have a thing pull down. At the bottom of that there's a "Today's rain". In here put 0.000 in the box next to "Desired total".
HARDWARE
Davis VP2+ with leaf/soil, extra temp/humid station custom wind. Purple Air PA-II. Boltek LD-250/Microsferics TOA kit. Excelvan/Fine Offset WH2310.
SOFTWARE
WD 10.37

The weather station has moved from McKinney, Texas to Plano, Texas.

 

anything