The transmitter does not show an accurate reading for wind direction. It does show a reading for wind speed and seems accurate. The wind vane itself seems fine and spins freely changing directions with the wind. The display always shows direction as straight north and never changes.
I received it used and an owner before me resoldered the sensor cable wires to the circuit board inside the wind sensor unit. I do not know what issue they had. The solder job was a mess. There was no display for wind speed or direction until I cleaned up the solder job. Now as I mentioned we do have a reading for speed and direction....speed is correct but direction always North.
I'm wondering if there are any tech type people on here that might be able to steer me in the right direction to troubleshoot this issue. Thanks!