Author Topic: WS-2000 not uploading to ambientweather.net  (Read 760 times)

0 Members and 1 Guest are viewing this topic.

Offline KK7X

  • Contributor
  • ***
  • Posts: 128
  • KIDRATHD3
    • Rathdrum Weather
WS-2000 not uploading to ambientweather.net
« on: October 16, 2018, 01:09:42 PM »
I just received my WS-2000 yesterday and went through the setup step by step.
It is not uploading the ambientweather.net however.

I have confirmed the MAC address on both the console and the web.
I reset the tablet and rebooted my router
Upper left corner of the tablet show the WIFI Icon but not the Ambient Icon.  The Ambient Icon was showing at first.

I have not tried WU yet as I have it running elsewhere.

Anything else I should try?

Dennis

Offline Sir_MAK

  • Senior Member
  • **
  • Posts: 95
Re: WS-2000 not uploading to ambientweather.net
« Reply #1 on: October 16, 2018, 01:21:02 PM »
Double check the mac address you put in on the Ambient web site.  Had the same issue and found I had put an 8 in instead of a 0 for a digit of the mac.
Ambient WS-2000, Central Ohio - WU WC
Ambient
WS-2902, Lake Erie   -    WU WC

Offline KK7X

  • Contributor
  • ***
  • Posts: 128
  • KIDRATHD3
    • Rathdrum Weather
Re: WS-2000 not uploading to ambientweather.net
« Reply #2 on: October 16, 2018, 01:27:55 PM »
I just double checked the setting and the MAC address is correct. 
« Last Edit: October 16, 2018, 01:41:02 PM by KK7X »

Offline cjtamu

  • Member
  • *
  • Posts: 28
Re: WS-2000 not uploading to ambientweather.net
« Reply #3 on: October 17, 2018, 07:34:46 AM »
Had a similar issue where mine was uploading sporadically. I disconnected my WiFi then re-entered on the console. Powered console down and back up and everything was good after. Check your console history first and make sure you’re getting reports from the array at regular intervals.

Offline KK7X

  • Contributor
  • ***
  • Posts: 128
  • KIDRATHD3
    • Rathdrum Weather
Re: WS-2000 not uploading to ambientweather.net
« Reply #4 on: October 17, 2018, 09:56:02 AM »
Thank you for the responses.  It is working now.