Topic: wu 2 pws showing same data from 1 station

[Platokidd]

I have 2 pws uploading to wu 50 miles apart.. The data for both station showing on wu is pulling from the same station.Plato ridge = Home station. Notice WU stations is showing data from blackhawk valley campground. [ You are not allowed to view attachments ]  [ You are not allowed to view attachments ]  [ You are not allowed to view attachments ]  [ You are not allowed to view attachments ]

[Platokidd]

Basically, WU data matches Ambient for my Blackhawk Valley Campground Station.
WU data for Plato Ridge does not match Ambient. The data WU shows for Plato Ridge matches Ambient's data  for Blackhawk Valley Campground.

It will for a few seconds  or before updating will show the correct data and then switches to back to pulling the wrong data.
Has anybody seen this before and if so, is there a fix?

https://www.wunderground.com/dashboard/pws/KILELGIN47 
https://www.wunderground.com/dashboard/pws/KILROCKF100

If you open KILELGIN47 you can see  the data is cycling from both my stations.

[Platokidd]

Couldn't deal with the bad data and stopped uploading from Plato Ridge to WU. That said, it's still showing online with the wrong data from Blackhawk Valley Campground. 

Hopefully in a day or 2 it will clear it self out of WU. Then will try uploading again.

[galfert]

I would check your Ambientweather.net account. You probably have an ambientweather.net device set to upload to WU. It probably is sending to the wrong WU account from there. Realize I'm not talking about the console itself. The problem is most likely in Ambientweather.net cloud settings. Basically I would turn off all WU upload from Ambientweather.net. Each console can send to WU directly and that is preferable.

[Platokidd]

Okay, with the awnet app not showing anything at the campground, ambient.net not showing this station. Guess I will have to bring this pws home to sort out.

Tried making a hotspot to connect, nojoy.

Thus, with all the bad cycling data between my 2 pws showing at home, I deleted my home unit and made new.

Now once again I will have to wait for the neighborhood name to adjust correctly or the old wu servers to be turned on  to edit... frustrating....