WXforum.net
Weather Software => WeatherLink/weatherlink.com by Davis Instruments => Topic started by: cedarridgewx on June 15, 2019, 08:13:20 PM
-
Hi All,
After many years and moving from Europe to USA I got myself a new station... wireless VP2 Pro Plus with FARS.
All is now installed. I have the ISS on the ground next to the house, and anemometer on the roof linked using a wireless connector.
Have a few questions regarding the weatherlink live.
On the console everything looks fine and all data is showing.
On the weatherlink live website I had to add ISS and the extra sensor and everything is showing in my bulletin....but NOT on the chart page I only see basic data...no UV, Solar, wind, etc.... Any idea why that is?
On the weatherlink app in iOS, I dont see wind at all....
Same story with uploads to the WU....no wind data.
I got the pro+ subscription.
Any idea why this is? Please help.
Many thanks,
Paolo
https://www.weatherlink.com/bulletin/022fc315-696c-48f4-8231-d95cd190c4cd
-
Assuming the station you linked to is the station in question:
The wind data is not currently showing in the weatherlink.com Bulletin - why not add the wind graphics? Sounds to me that the Weatherlink Live transmitters may not be configured correctly.
-
Probably...but am not sure what i did wrong...
Its showing wind as extra sensor for some reason....so no graph etc.
P
-
Go into the Device configuration screen then select the ISS transmitter (probably channel #1?). Choose Advanced Settings and you should see an option to 'Select Anemometer'
-
yes yes yes.... looks like it worked. tried it a few times and now its ok. Thank you John!