Author Topic: Arduino chilled mirror dew point sensor?  (Read 1680 times)

0 Members and 1 Guest are viewing this topic.

Offline SLOweather

  • Global Moderator
  • Forecaster
  • *****
  • Posts: 3456
    • Weatherelement Moline IL
Arduino chilled mirror dew point sensor?
« on: January 30, 2018, 02:59:43 PM »
My Dew Point Depression got me to thinking about chilled mirrors.

It seems like it wouldn't be too hard to build an Arduino based chilled mirror dew point sensor, with a Peltier device and mirror, a temperature sensor, and an LED and photodetector.

Generally, my ideas turn out to be not so original when I do a search, but I couldn't locate such a device.

Maybe it's harder than I think...

Offline dupreezd

  • Forecaster
  • *****
  • Posts: 512
Re: Arduino chilled mirror dew point sensor?
« Reply #1 on: January 30, 2018, 03:57:04 PM »
Good idea,I think this is do-able.

My 2 cents.
In stead of using a glass mirror as it transfer heat/cold rather slowly, use a highly reflective piece of stainless steel.
Angle the led and photo detector so that together with less light reaching the detector, the refraction of light in the water molecules aid in the detection.

The Arduino code should be fairly easy.
Davis VP2 6163 | WiFi Logger
CWOP - FW0717
Blitzortung 2100

Offline Old Tele man

  • Singing in the rain...
  • Forecaster
  • *****
  • Posts: 1365
Re: Arduino chilled mirror dew point sensor?
« Reply #2 on: January 30, 2018, 05:53:47 PM »
Modify an old PC "mouse," it contains all the necessary electronic components already...except the "mirror" surface.
• SYS: Davis VP2 Vue/WL-IP & Envoy8X/WL-USB;
• DBX2 & DBX1 Precision Digital Barographs
• CWOP: DW6988 - 2 miles NNE of Cortaro, AZ
• WU - KAZTUCSO202, Countryside

Offline SLOweather

  • Global Moderator
  • Forecaster
  • *****
  • Posts: 3456
    • Weatherelement Moline IL
Re: Arduino chilled mirror dew point sensor?
« Reply #3 on: January 30, 2018, 06:33:42 PM »
I was thinking of a stainless steel camping mirror. Also, Peltier devices are reversible in polarity and thereby hot/cold side, so it should be possible to chill it to dew point, reverse the current, warm it up to dry it off, and repeat. Maybe even include a fan to hasten drying and blow dust off the mirror.

Hmmm... I wonder if a Davis leaf wetness sensor could be substituted for the mirror...