Weather Station Hardware > AcuRite Weather Stations

Atlas indoor temperature

(1/1)

mlaskowsky:
I just purchased a Atlas weather station and it works very well.. The only thing I can't figure out is how to get the indoor temp to work. Followed the directions and my indoor temperature won't register. I can't find anything that needs to be setup.
Thanks for the help!

mikemaps:
The indoor temp is displayed very small at the very bottom of the screen, perhaps you just overlooked it.

mlaskowsky:
Thanks for the response. I can see it at the bottom but it is blank.
Thanks

mikemaps:
Not sure why, maybe someone else can help.

worachj:
Its most likely broken. What happens when you touch either the indoor temp or indoor humidity reading? It should bring up a secondary screen showing a daily graph.

Can you get to the calibration screen?


--- Quote ---How To Set A Reading Calibration


* From the top-left section, select the Menu icon.
* Select Calibrate.
* Select Indoor to adjust readings taken by the display. Select Outdoor to adjust readings taken by the outdoor device.
* Using the up and down arrows, select the reading type to be calibrated > select next.
* Using the up and down arrows, set an adjustment.
* To save the calibration adjustment, select done.
--- End quote ---

Navigation

[0] Message Index