Topic: AirCam-v3.0.7 dont work in D-Link DIR-505 meteobridge **solved**

[jmontamat]

AirCam-v3.0.7.build5acf207 works correctly on TP-LINK TL-MR3020, but not in

D-Link DIR-505 FW 1.3, 2.3 MeteoBridge (4697) gives me error and initialization does not work ???

thanks

[docbee]

Can you please allow me to login as explained here:
http://forum.meteohub.de/viewtopic.php?f=57&t=9885

Please email link to "info(at)meteobridge.com".

[jmontamat]

Thanks I will do so

JM.

[docbee]

Just fixed with latest update.

[jmontamat]

Ok works properly with the latest version

thanks.

JM.

[jmontamat]

I'm sorry but DIR-505 does not support aircam AirCam.v1.2.17961.130609.0103, my continued access the same if you want to try

Thank you

[docbee]

Can do, but when it works with newest firmware I would like to spare the effort.
Or is there a reason for using the older 1.2 firmware?

[jmontamat]

aircam 1.2 has more setting possibilities, contrast brightness etc is more popular and stable, if possible, works very well in TL-MR3020 if it could be possible to work with the two would be perfect.

TL-MR3020 but I plan to use it in a station without AC. power.

Thank you

JM.

[docbee]

When you do a reboot of Meteobridge after changing the cam, that seems to help.
Reason is that you have it connected directly to the Meteobridge LAN port so that
Meteobridge does some relaying the AirCam into your WLAN. Looks like this needs
a reboot when new cam connected.

I did a reboot and now 1.2 is received fine. Does not seem to be something special with the DIR-505.
But as relay daemon is different between TP-Link and D-Link devices (other OpenWRT
releases used) there might be some different handling... can't say 100% sure.

[jmontamat]

Does not work either via the lan bridge the DIR-505, I will use the FW 1.1 works well aircam

thanks for your quick response and interest.

[docbee]

Problem is reported by others to be solved with latest update.

[jmontamat]

thanks !!