« previous next »
Pages: [1]   Go Down

Author Topic: Pinout on Boltek PCI?  (Read 3305 times)

0 Members and 1 Guest are viewing this topic.

Offline KA8MAV

  • Member
  • *
  • Posts: 20
    • Lake Holiday Weather Station
Pinout on Boltek PCI?
« on: March 15, 2008, 12:36:24 AM »
Does anyone know the pinout of the header pins on the PCI card?  There must surely be a way to interface something to it.  I'd really like to get an external relay board going.  Has anyone proved the pins to see if they are usable?
Logged
NWS ID: AS879

Hardware: Davis 6153 Vantage Pro2 with 24hr FARS & 6345/6470, Boltek Stormtracker PCI
Software: SERIAL datalogger with Virtual VP, VWS w/ VWSAPRS, Weatherlink, Weather Display, NexStorm w/ Discharge, etc.<br>
Lake Holiday Weather - www.Lake-Holiday.net/weather/

Offline Anole

  • Forecaster
  • *****
  • Posts: 585
    • http://pineislandweather.com
Re: Pinout on Boltek PCI?
« Reply #1 on: March 15, 2008, 05:57:25 AM »
If it plugs into a PCI slot then it should have a standard PCI pinout:

http://www.interfacebus.com/Design_PCI_Pins.html
Logged

Offline KA8MAV

  • Member
  • *
  • Posts: 20
    • Lake Holiday Weather Station
Re: Pinout on Boltek PCI?
« Reply #2 on: March 15, 2008, 08:43:09 AM »
I'm talking about the male headers on the board itself.  The ones for example the LTS-2 Timestamp Card plugs into.
Logged
NWS ID: AS879

Hardware: Davis 6153 Vantage Pro2 with 24hr FARS & 6345/6470, Boltek Stormtracker PCI
Software: SERIAL datalogger with Virtual VP, VWS w/ VWSAPRS, Weatherlink, Weather Display, NexStorm w/ Discharge, etc.<br>
Lake Holiday Weather - www.Lake-Holiday.net/weather/

Offline Anole

  • Forecaster
  • *****
  • Posts: 585
    • http://pineislandweather.com
Re: Pinout on Boltek PCI?
« Reply #3 on: March 16, 2008, 07:39:49 AM »

Ahh. misunderstood the question.
Logged
Pages: [1]   Go Up
« previous next »
 

anything